How to Hang Led Strip Lights on Wall Without Adhesive is the most commonly asked question. There are many ways how to hang LED strip lights on wall without adhesive:
1: Command Strips.
2: Velcro Strips.
3: Double-sided tape.
4: Mounting Putty.
5: Mounting Channel.
6: Magnets and Screws
7: Hooks and Clips.
8: Wire or String Method.
It’s most approachable that you are looking for an answer onhow to hang LED strip lights on wall without adhesive, you are most probably looking for a way that must not damage your wall and its paint in any way.
So, we will give you all the ways that tell you how to hang LED strip lights on wall without adhesive. With this, we first describe to you in detail those methods so that by applying these, your wall and paint will not be damaged. In these, we will use some tapes of different types, but we guarantee that when you peel them off, they will not leave any stain on your paint or a wall.
While discussing about the ways that how to hang LED strip lights on wall without adhesive. We also give you the methods and their practical implementation details that may damage your wall or its paint, but they are alternative methods in case you want to avoid hanging LED Lights on a wall with adhesives.
By saving your time. We are going to give you the implementation details of the methods that we mentioned above about how to hang LED strip lights on wall without adhesive:
How to Hang Led Strip Lights ON Wall Without Adhesive: 4 Methods that will not Damage Your Wall:
1: Command Strips:
Command strip is one of the best temporary methods that tells you that how to hang LED strip lights on wall without adhesive to stick the LED lights to a wall. In this method, you do not need any such kind of instrument to attach the LED lights to the wall using command strips.
You have to attach the half portion of the command strip with the back side of the LED strip light, and you can uncover the other half side of the Command strip. Then, you have to attach the LED light strip to the place where you want to stick it.
2: Velcro Strips:
These strips can be used on the principle of “Hook and loop fastener”. Proved to be a good method that tells you how to hang LED strip lights on wall without adhesive. There are two portions of these strips:
1: Hook Side.
2: Loop Side.
There are tiny and stiff hooks on one side of Velcro tapes, and there are little but softer and fluffy loops on the other side of Velcro tapes. When we attach them, they stick with each other firmly to hold some material and to give support to the shared medium that they are using.
Velcro Strips are one of the best methods ever suggested when you are looking for an answer on how to hang LED strip lights on wall without adhesive. These strips have no adhesive involvement case, so don’t leave any adhesive sign on your wall when removed.
3: Double Sided Tape:
One of the best approaches if you are looking for a way that how to hang LED strip lights on wall without adhesive. Then, the double-sided strips should be used because they will leave no stains when removed from the wall.
To use them, you don’t need any instrument except the LED lights, which you have to attach to the wall, and the double-sided strip that you have to use to connect the LED strip to the wall.
To use them, you have to attach the piece of double-sided tape on the back side of the LED light strip, and then you just have to connect the LED light to the wall. Now, finish from your side, and you will see that the LED strip light will be completely attached to the wall.
4: Mounting Putty:
It is a method in which you can use again, which means it is reusable. While we are discussing how to hang LED strip lights on wall without adhesive, mounting Putty is one of the best approaches that you can use to attach the LED strip to a wall.
For using Mounting Putty, you need nothing, just LED strip lights that you have to hang on a wall and mounting Putty. By this, you can turn the LED light strips on a wall. After this, you finish and only have to attach the LED light strip to the wall.
In any case, if you want to remove the LED light strips from the wall, you have to remove the mounting Putty, and it will not leave any stain on your wall.
How to Stick Led Lights ON Wall Without Adhesive: 4 Methods that will done by Drilling/Hammer:
1: Mounting Channel:
Mounting channels are one of the best way that can tell you that how to hang LED strip lights on wall without adhesive. These are the materials that are U-shaped or C-shaped. They are also highly corrosion-resistant materials.
These are primarily used in hanging the LED light strips on a wall and can also increase the beauty of LED light strips in your room.
If you want to use them and they are recommended by us, In case you don’t want to use the adhesives to hang LED lights on a wall and want to know that how to hang LED strip lights on wall without adhesive.
But keep in mind that if you have a budget and want to increase the beauty of your room, then you must use the Mounting Channel.
You can use them, but you first have to collect the tools and materials required for their fitting, which are:
1: Drill Machine.
2: Screw and Anchors.
3: Mounting Channel.
4: Screw Drivers.
After collecting these materials, you have to follow these steps to use the Mounting channel to attach the LED light strips to the wall:
Step No 1: Drill the Hole in a Wall:
First, drill the Hole in a wall and make it continue till the spot where you have to extend LED strip lighting in your room.
Step No 2: Adjust the Screws with Anchors:
Then put the screws with anchors and attach the mounting channel to a wall. For tightening the Screw, you can use the screwdriver to fit the mounting Channels with the wall properly and efficiently.
Step No 3: Fitting the LED Lights Into the Mounting Channel:
Then, you have to bring LED light strips close to the Mounting Channel and fit them in the Mounting Channel, and you finish with all the steps required to attach and hold the LED light strips with a wall using the Mounting Channel.
2: Magnet and Screws:
While looking for an answer on how to hang led strip lights on wall without adhesive, using Magnets and Screws for this purpose is one of the most recommendable methods by which you can attach the led light strips to the wall.
In this method, your wall decoration or paint will not be affected because this method doesn’t demand anything that, when removed, will ruin your wall paint or its beauty.
For this method, the tools that you must require are:
1: Drill machine.
2: Simple Magnets/Magnets with Adhesive Back.
3: Srews and Anchors.
4: Screwdrivers.
While you are curious about how to hang LED strip lights on wall without adhesive. Now these are some steps that you have to take to complete the led strip lighting fitting on a wall using Magnets and Screws method:
Step No 1: Look for a Surface for a Magnet (Steel Surface) or Drilling Hole in a Wall:
Now, when you have to start to attach the LED light strips on a wall using Magnets, you first have to look at the place on the wall, which is made of steel that can be appropriate for attaching the MagnetMagnet. If you find it excellent, connect the MagnetMagnet to it, and with this, stick the LED light strips to a magnet.
If you don’t find it, don’t worry; there is a superb solution.
Just keep reading.
You can use the screws to attach the MagnetMagnet with them.
For this, you first have to drill a hole in a wall. After making measurements that after how much distance, you have to drill a hole in a wall to adjust the Screw with an anchor in it to attach the MagnetMagnet to it.
Step No 2: After Drilling, adjust the Screw in the Hole:
After when you are done with Drilling, adjust the Screw in the Hole that you make via using Drilling. For tightening of screws, you can use the screwdriver. By this, you can easily pull the Screw.
Step No 3: After that, attach the led light strips with Magnet via Glue and clamp the MagnetMagnet with a Screw:
And then, after you are done with adjusting the Screw in the Hole that you made via Drilling in a wall. You have to attach the LED light strip with a magnet using glue or any adhesive material that you may like to use, or that is readily available to you and workable.
After this, you have to attach the MagnetMagnet and LED strip lights that you stick with it via glue or any other adhesive material that is workable and available to you.
Now while you are looking for an answer on how to hang led strip lights on wall without adhesive, you are done with fitting the led light strip to the wall by using magnets and screws.
Step No 4: Test the Led light strip after this arrangement:
You must check whether LED light strips are working well or not. Because if there is any problem, then you study for that particular problem and fix it on time. By this, you can enjoy the maximum experience of hanging the LED lights in your without using any adhesives.
Note: There is another way that can helps to find one way that how to hang LED strip lights on wall without adhesive. In this method there is also another way by which you can avoid the drilling process. In this case, you can also buy the magnets with adhesive back from the market. You can easily use them in place of using screws in a wall via utilising the process of Drilling if they are available in your nearby need easily.
3: Hooks and Nails/Clips:
While you are looking for a method how to hang LED strip lights on wall without adhesive, here is one of the best methods which we are describing to you by using Hooks or Nails/Clips on your wall. These hooks and nails/clips are specially designed to lift the LED light strips on your wall.
If you are not worried about damage to your wall and wall paint, you can freely use this method. It is one of the best alternatives to hanging LED light strips without using adhesives. Also, don’t worry or be concerned about any damage to your wall or wall paint.
For this process, things which you want are mentioned by collecting them. You can hang your LED light strips on your wall by using this method:
1: Hooks or Nails/Clips.
2: Screws.
3: Screw Drivers.
4: Drill Machine.
After collecting these materials for hanging the LED light strips on a wall, you have to follow these steps:
Step No 1: Look for a Surface for Hooks where You Have to Drill a Hole in a Wall for them:
The first step that we suggest to take, while discussing about how to hang LED strip lights on wall without adhesive, is to locate where you have to make a hole to attach with its hook via using screws. You have to make calculations first to mark the places where you have to drill a hole. By this, you can attach the hook to that place by using screws.
Step No 2: Screw the Hook Where You Drill a Hole on a Wall:
We are discussing the methods of how to stick led lights on wall without adhesive. It is the second step of this method, in which you screw the hook on a wall using a screwdriver to tighten the Screw, which ultimately strengthens the hook now attached to a wall.
Step No 3: Hang the LED Light Strip on a Hook that You attached to a wall:
The third step that you have to take in this method is to hang the light on the hook that is just attached to a wall by using screws and screwdrivers.
By doing these steps, you just finished all actions that are necessary to hang a light on a wall via using the method of Hook and Nails/Clips.
Step No 4: Test the Led light strip after this arrangement:
You must check whether LED light strips are working well or not. Because if there is any problem, then you study for that particular problem and fix it on time. By this, you can enjoy the maximum experience of hanging the LED lights in your without using any adhesives.
4: Wire and String Method:
While discussing how to stick led lights on wall without adhesive, this is another one of the best method in this category. In this method, the necessary materials that you require are the following:
2: Screws
3: Screw Driver
4: Wire or String
Now you have to follow these steps, and then you will done with hanging the LED lights on a wall:
Step No 1: Determine the Starting and Final Points:
While looking for an answer to how to stick led lights on wall without adhesive, we have learned about this method. The first step of this method is to find and determine the first and the final point where you have to end the LED light strip in your room.
Step No 2: Drill the Screw at the Starting and End Points and attach the String with Starting and Final Points:
The next step of this method is to drill the Screw at the starting and end point which you determine. After you are done with it, you have to attach the string from the starting and the final point and have to tighten it up to the last stage.
Ensure there will be no ups and downs in the whole string due to un-tightness.
Step No 3: Attach the Led Strip Light with the String:
Now, the last step is to attach the LED light strip with the string that you hang on a wall by connecting it with the starting and the final point.
Step No 4: Test the Led light strip after this arrangement:
You must check whether LED light strips are working well or not. Because if there is any problem, then you study for that particular problem and fix it on time. By this, you can enjoy the maximum experience of hanging the LED lights in your without using any adhesives.
Note: These are some steps of this method that tells you how to stick led lights on wall without adhesive. By following these steps of this method you can easily attach the LED lights strip on a wall.
Conclusion:
While looking for an answer on how to stick led lights on wall without adhesive, we concluded that we can turn the LED light strips on a wall by many methods mentioned in this article.
You can use any method by following all the steps and collecting all the tools we mentioned in each technique. Then, you can hang the LED strip lights on a wall easily.
If you have any queries or questions related to this article (How To Hang LED Strip Lights on Wall Without Adhesive), you can email us or comment.
Frequently Asked Questions: FAQ’S:
Q1: Can We Use Scotch Tape over LED Light Strips?
The answer is no because while you looking the FAQ’s about how to stick led lights on wall without adhesive and you are also curious about this one also then remember that scotch tape in the one-sided and double-sided tape is preferred to scotch tape practically.
So it is highly recommended that you use double-sided tape instead of Scotch Tape.
Q2: Can I use Zip Ties to hang LED Light Strips?
Yes, they are suitable for attaching the LED Light strips to the wall. If you don’t know any method about how to stick led lights on wall without adhesive except this one.Then you can considered it as a practical option to secure the LED lights if you have a proper and appropriate structure to attach them.
Q3: What if I have textured or Uneven Walls?
If you want to know that how to stick led lights on wall without adhesive and you have have uneven or textured walls, use the clips or channels with adjustable mounting media that are workable because they conform to rough surfaces.
